Find Waste Tire Recycled, Output Fuel Oil, Waste Tires Pyrolysis Plant on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Home > Products > Other Flat Iron > Waste tire recycling to fuel oil pyrolysis plant

Waste tire recycling to fuel oil pyrolysis plant

  • Waste tire recycling to fuel oil pyrolysis plant
  • Waste tire recycling to fuel oil pyrolysis plant
  • Waste tire recycling to fuel oil pyrolysis plant
  • Waste tire recycling to fuel oil pyrolysis plant

Waste tire recycling to fuel oil pyrolysis plant

    Payment Type: L/C,T/T,Western Union
    Terms of Trade: FOB,CIF
    Min. Order: 1 Set/Sets
    Delivery Time: 20 Days
    Packaging: Seaworthy packing 1*40FR+1*40HQ
    Productivity: 200 sets per year
    Brand: SIHAI
    Transportation: Ocean
    Place of Origin: Henan
    Supply Ability: 200 sets per year
    Certificate: CE ISO
    HS Code: 8419409090
    Port: Lianyungang,Qingdao

Basic Info

Model No.: LJ-10

Product Description

1. Introduction of waste tire recycling to fuel oil pyrolysis plant

This plant does not have to get rid of silt, moisture content, iron wire impurity and so on from the scrap plastic, directly loads in the rotary system high temperature atmospheric pressure split processor, catalyses, heats up, distils oil steam, the oil gas through the condenser, the liquefied part condense into the oil mixture, and the unliquefied part holds through the fuel gas system into the processor bottom to burn.After the mixture oil condense, put into fractionation processor to heat though catalytic reforming process, and get the oil steam. Then the oil steam through the condenser to be basic fuel, and add various additives to become qualified fuel.



2. Features of waste tire recycled to fuel oil pyrolysis plant

a. In the design of pyrolysis key device, completely overcome the local heat uneven, easy to break, low yield, short life and other unfavorable factors of the current vertical flat bottom pyrolysis plant.

b. With fast and practical feed and slag system.

c. Efficient gas heating system. In the process of refining, when the heated gas reaches 150 degrees Celsius, it will produce a lot of gas which can not be liquefied in normal temperature and pressure methane to butane.These gases are fully burned by specially designed gas nozzles, will produce a lot of energy which greatly saves energy.

d.Flue dust removal system has a desulfurization dust cather(qualified), equipped with two ways water impact cyclone dust removal chamber, which can ensure the discharge of flue outlet reach safe discharge standard



3.Parameters of waste tire pyrolysis plant to fuel oil pyrolysis plant

Model

Raw material

Structure form

Cooling system

LJ-10

waste tire, plastic,rubber

Horizontal

water cooling

Heating method

oil output rate

Power

Installation

Directly

45%

15.5KW

Foundation



4. Safety of waste tire recycling output fuel oil pyrolysis plant

The main equipment is of high safety. The phase of the unliquefizable waste gas produced during the process is alkyl from C1 to C4, which is dangerous when burning directly. In our process, it is transferred first through a water seal device and a safety device- burning air muzzle. Before burning, we should ensure the safety of production.



5. Environmental protective of waste tire recycling to fuel oil pyrolysis plant

Dispose waste gas, liquid, and residua in the process:

a. Waste gas: Transferred through two safety device: water seal &burning air nozzle. Fully burnt, not only eliminated pollutant but also minimized the quantity of fuels. For smoke dust discharge, we apply series machines of patent in our company Desulphurization and dust remover which could control the smoke dust discharge amount meet relative standards of GB-2001.

b. Waste liquid: Produced waste acidic water in the process of oil disposing (50kg process from 1 ton of oil easy to process for small quantity). counteract the liquid by alkalescent liquid solution. After three stage of filtration, the litmusless wa ste water was introduced to evaporator(use the heat of the flue of main processor as its heating resource)

c. Waste solid. The solid residua will be left after the catalyst splitting from scrap plastic, approximately composes the waste plastic weight about 5% to 10%. Its main component is the thick black carbon. It can be the raw material of the production industry of black carbon. Also could be mixed with the pulverized coal ash which produces for the raw material thermal power plant, also could be the raw material of manufacture pulverized coal ash brick (one kind of environmental protection building material).


1a

6v

8v

4v

1v





Shangqiu Sihai Energy Technology Co., Ltd

 Shangqiu Sihai Energy Technology Co., Ltd is a collection of research and development, production, sales and after-sales services, which has rich experience in the field of waste management over 20 years. Our company covers an area of 37,000 square meters. Our company has a huge professional technical team, including 2 senior engineers, 16 senior technicians, 28 mid-class technicians, and 82 technicians. Our main products are divided into two catalogries: pyrolysis plant and distillation machine, including tires pyrolysis plant, tyre pyrolysis plant, waste rubber pyrolysis equipment, waste plastic recycling machine and other waste management machines, and waste oil distillation equipment, waste engine/motor oil recycling machine, tire oil distillation plant, plastic oil refinery machine and crude oil distillation equipment. Our products have been exported to South Korea, Thailand, the Philippines, India, Malaysia, Malaysia, Myanmar, Afghanistan and the United States and other countries and regions, which obtain a good reputationand happy feedback.

Company Info

  • Company Name: Shangqiu Sihai Energy Technology Co., Ltd
  • Representative: Juxian Dai
  • Product/Service: Waste Tire Pyrolysis Plant , Waste Plastic Pyrolysis Plant , Waste Tire Recycling , Waste Oil Distillation Plant , Crude Oil Refinery , Waste Oil to Fuel Oil
  • Capital (Million US $): 20,000,000
  • Year Established: 2013
  • Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
  • Export Percentage: 51% - 60%
  • Total Annual Purchase Volume (Million US $): US$5 Million - US$10 Million
  • No. of Production Lines: 5
  • No. of R&D Staff: 11 -20 People
  • No. of QC Staff: 5 -10 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 3,000-5,000 square meters
  • Factory Location: EAST SIDE OF CHENFENG AVENUE, DEVELOPPING DISTRICT, SHANGQIU
  • Contact Person: Ms. Grace
  • Tel: 86-13837006235
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters